2 visitors on line

klein1.jpg
prefab-little-2.jpg
middel1.jpg
prefab-large-1.jpg

Date & Time in Bali

CURRENT LOCAL DATE AND TIME IN BALI:

Thursday, 14th November 2024
5:28:16 am

Previous page

Rendering our architectural services for the tropical wooden prefabricated homes (wooden knock dowm houses) may be the cheaper option

 ABSTRACT

P.T. Prefabworld Bali offers the possibility to render design services which may include architectural drawings and/or structural calculations for a design in accordance with your own requirements and/or a design following your modifications to one of our standard designs. If necessary we would be happy to coordinate with your architect should you have engaged such person as to assist, help and advise him/her on our special special prefab system. We offer a variable design package which can be tailored to fit to your wishes and requirements, divided in a number of stages (see below). Very rarely architects offer free of charge services. They will offer you a design against a certain architectural + structural design fee (if needed). We are not much different, except that we will refund the full architectural design fee in the event that a fabrication order materializes. Structural design fees will not be refunded. Our design fee depends on the number of design stages we will be involved in. You may review the stages below. We would be happy to provide  a number or references of clients for whom we were engaged in the preparation of a design package.       

 

 ADDITIONAL INFORMATION

FOR THOSE WHO WANT TO KNOW IN DETAIL ABOUT OUR ARCHITECTURAL AND ENGINEERING SERVICES

 

P.T. Prefabworld Bali not only build wooden prefab houses but also renders design services for it Bali prefab homes which may include architectural drawings and/or structural calculations and drawings.  So you wish, our team of architects and engineers are available to cooperate with your archtect and/or engineer to review the design as to match this with our typically developed prefab system. We may also design in accordance with your local circumstances, hence based on locally available building materials. We have so far successfully designed projects for Hawaii, Panama, a number of Caribbean islands, islands in the Pacific and Northern Indian Ocean, wheras the client could obtain the full building license from the Building Authorities without any comments.  

You may be interested in having us engaged in one of the following services;

♦ we prepare a design based on your sketch or ideas,
♦ have one of our standard designs modified to your wishes and requirements,
♦ have a design prepared from scratch,
♦ wish to  buy one of our existing standard designs for self build, either in Bali and surroundings or in any other country. Click <here>  

1. PROJECT DIVIDED IN STAGES 

The stages of architectural services are described below;

 Stage a:  Project initiation
 Stage b:  Schematic design
 Stage c:  Pre-design
 Stage d:  Basic design
 Stage e:  Detailed design + 3-D render
 Stage f:  Construction drawings + techical specifications
 Stage g:  Bid documents and evaluation of bids

The nature of the decision making process, Owner's directives, and the level of design input requested, all affect the overall design fees.  Therefore, fees can only be estimated at the start of a project based upon the potential size and complexity of the project and intended work to be carried out by us.  A full scope of architectural services often falls within the range of 10% to 15% of the cost of prefabrication.
The stages of architectural services are described below. Each category notes a percentage of time that we typically spend in that phase. The total of the percentages will determine the desigm fee.

CLICK ON THE BUTTON BELOW TO OPEN AND REVIEW THE ACCOMPLISHED DESIGNS PAGE, WHEREAS THE CLIENT ONLY REQUIED A DESIGN FROM US (NO PREFABRICATION) AND BUILT THE UNIT BY HIMSELF OR ENGAGED A CONTRACTOR.  

Button accomplished designs

 

 The following explanation may be a helpful tool to determine to which stage and degree your design should be worked out or wish to be worked out.

 Stage a:

If you only need a a set of drawing for a quick review for own use 

Review client objectives, aesthetics, space planning, financial goals and schedule.  Establish program of spaces with rough square meter or footage for Owner approval.

The initial plan comprises a floor plan with main dimensions and all elevations. No cross sections and details will be provided. The sketch plan is widely used for a first interpretation of the design by the owner for a global review whether the project will fit and match the owner's requirements. The conceptual design is in a very preliminary stage and in most cases will require an upgrade to stage b and c or even to stage d

 Stage b:

If you only need a set of drawings for a first global quick review by the local building Authorities

The schematic design comprises a more detailed worked out plan with all dimensions, all elevations and some cross sections. The concept comprises one plan. Minor changes and/or modifications will be accepted until the client is satisfied, whereas a second concept may be worked out, however, in the event of drastic and major changes on any of the concept (1 or 2), a new modified concept will be drafted against a variation order of 10% of the fee due for this stage, a fee which is non refundable. The same holds for a 3rd, 4th, 5th, etc. concept. During the conceptual design we will in broad lines consult on the program of requirements (if available). A ballpark figure on the cost for the house will be submitted. A conceptual design is widely used for a first assessment by a Building Authority, council or county whether the project will be eligible for a building permit.

 Stage c:

The drawings prepared in this stage can be used to invite a contractor to submit a ballpark figure for the building costs 

The pre-design. This stage comprises the preparation of the plan in more detail, worked out elevations, cross sections, type of windows and doors and if so required we will prepare a pre-design structural calculation. We will consult in detail on the program of requirements (if available). The main structural dimensions will be determined in this stage. The client may request for changes as long as these changes do  not change the concept. The maximum time spent on changes shall not be more than 10% of the fee due  In the event that more changes are being requested a similar procedure will be applied as mentioned in Stage b.

 Stage d:

If you would like to inquire for a quotation from a contractor within an error price level of plus or minus 10%, or in the event that you need a quotation based on a re-generation of your drawings into our prefab system drawings.  

Stage d is the basic design stage. This stage is recognized by the detailing of the structure, preparation of all pertinent cross sections, typical details, foundation lay-out, worked out floor plans, windows, doors, etc. During this stage final late changes are still allowed, however, to a maximum time spent of 5% of the fee due. Time spent in excess shall be reimbursed against a variation order similar to Stage a. Once the client has approved the basic design a detailed structural calculation may need to be prepared (*). Change to the drawings will be possible provided the client agrees against a variaton order for the payment of the actual time spent for a drafstman and/or an engineer to accomplish these changes

 Stage e:

This stage is required for the application of a building permit (local council or county (*)

Stage e is the final design phase. Drawings will be worked out into fully detailed construction drawings and foundation plans added.
Changes and/or modifications will be possibe, provided the client agrees against a variaton order for the payment of the actual extra time spent for a drafstman and/or an engineer to accomplish these changes/modificationss.
 
Note: All of the designs for a Building Authority, council or county need to be rubber stamped by a local architect or engineer. The client may at his own discretion engage an architect or engineer of his choice, or alternatively may ask help from our company for rubber stamping against an additional fee.

 Stage f:

In the event that you wish to engage a contractor to build the unit for you based on our detailed drawings and technicla specifications 
In stage f  the technical specifications will be drafted, detailed foundation plans worked out and plumbing and electrical plans added

 Stage g:

If you wish to issue the project for bidding by a number of contractors

This is a full detailed design package and will provdie any contractor all the tools to properly calculate his price for assembling the prefab houee. This stage includes the shop drawings. These are drawings detailed to the millimeter and shows each drilling hole, bolt location, dimensions of recesses and rebates, etc. of each part of the structure (every board, beam, column, truss chord, panel frames etc), With these drawings at hand it will be a piece of cake for your contractor to build the house exactly as we would have prefabricated it. This option may save you a significant amount of money since you do not need to ship the unit whereas you may use the whole package to invite a number of contractors to submit a bid and engage the lowest bidder. The process is that simple that with some DIY experience you may even do it all by yourself . View a number of drawings which are part of a full design package

 (*) A Building Authority may require that a static structural calculation be submitted. We strongly advise you to verify this with your local Building Authority. In the event that such calculation is required we will be able to prepare such calculation against a variation order. The structural calculation will be prepared in accordance with the IBC 2018 (latest USA codes) and will include an analysis for cyclone wind load resistance and/or earthquake loads if such is a mandatory requirement by the Building Authority depending on the location you will build. Extra costs will be  involved for the preparation of a structural calculation.

2. REFUND OF THE DESIGN FEE

If you decide to place a design or fabrication order with us we will deduct the full architectural design fee from the first prefabrication installment and after a formal approval has been obtained from the Building Authorities. We guarantee approval from the Building Authoriies on both our drawings and/or structural calculations (if needed). Structural design fees will not be refunded, whereas architectural fees will not be refunded (deducted) in the event that a fabrication order does not materialize. The remaining of architectural fees (if a design is much more simple than expected and less hours are needed), will not be refunded and/or utilized for the structural design or part of it, but be deducted from the first prefabrication installment.   

We will also be able to add the design drawings for the electrical and/or plumbing installation against a variation order.

3. CANCELLATION OF THE PROJECT DURING THE DESIGN PHASE

If A client decides to cancel the project during the design phase (architectural and/or structural) our company will not refund any outstanding money balance, - if any - , and provided our company is not in default. In such case we will complete the design for the available remaining of the deposit and will place a notification on the home page of our web site for free that the client's design is for sale. The client may decide for which price he/she wants to sell the design and , so he/she wishes, - can add the outstanding credit balance that he/she had with our company. We will not act as an intermediate during the financial negotiations between the client and the potential buyer, except for technical information required by the buyer.          

4. SUBMITTAL OF DRAWINGS SHOWN ON OUR WEB SITE 

Prior to an order and in compliance with our company policy we will not officially submit any drawing shown on our web site. Drawings can be reviewed in concept on our web site.


5. PUBLISHING OF DRAWINGS ON OUR WEB ISTE

By ordering a new design or by ordering to modify / change one of our standard designs, the client accepts and agrees that we publish this new or modified design on our web site. As to allocate some royalties for the client we will grant a one-time USD. 10/m2 (USD. 0.93/sqft) x the footprint area of the new design and will deduct this amount from the first prefabrication installment.  


CLICK ON THE BUTTON BELOW TO OPEN AND REVIEW THE ACCOMPLISHED DESIGNS PAGE, WHEREAS THE CLIENT ONLY REQUIRED A DESIGN FROM US (NO PREFABRICATION) AND BUILT THE UNIT BY HIMSELF OR ENGAGED A CONTRACTOR. 

Button accomplished designs

 

 

    

Prefab World Bali

Reviews from Prefab World Bali

"I am the project leader for the development of some large houses to be constructed on the island of Kauai. I have thoroughly investigated the option of builing on site versus purhasing the pre-fab home from Baliprefabworld. I am convinced that working with Baliprefabworld is the most economical, efficient and effective way to go. The beauty and aesthetics of these homes are truly wonderful. We are planning to work with Baliprefabworld to use a variety of their standard models to design the home we want. The professionalism, quality of materials, and design capacity of Baliprefabworld is exemplary".
Review from: Steven Ott, Berkeley, USA
Project: Resort for Kauai, Hawaii
Date: 08-10-2014
Rating: 5 out of 5.

Read more testimonials from Prefabworld Bali International: click here
Dear Visitor, In order to show proof and evidence that these testimonials are genuine you may send us an e-mail with a request to provide the e-mail address of the publisher of the testimonial. We will forthwith send you the information so that you can contact the person.
Read our copyrights
X

Right Click

No right click allowed